OVProtection.com - The Most Effective DC Over Voltage Protection- Total Protection that will Safeguard all your Electronic and Electrical Devices
OVP - Over-Voltage protection Module
Click to Enlarge Image

OVP - Over-Voltage protection Module
Retail Presentation with Sombrero Hole for Easy Pegboard Rack Display
Click to Enlarge Image


OVP - Over-Voltage protection Module
Click to Enlarge Image

OVP - Over-Voltage protection Module
Click to Enlarge Image

OVP - Over-Voltage protection Module
Click to Enlarge Image

OVP - Over-Voltage protection Module
Click to Enlarge Image


Cambiar a Website en Español Website Español Home | Distributors | Contact Us | Links


OVP is the Most Effective DC Power Protection And Conditioner For All Marine Electronics
And Other Electrical & Electronic Devices that are Susceptible to DC Power Disturbances

In today’s world of sensitive and increasingly complex electronics that require ever more complicated chips to run its functions and features, so consequently there is also a need to pack even more transistors into those chips into an already tiny space. So the only solution is to make those individual transistors increasingly smaller and smaller to be able to fit them in. Unfortunately as their size shrinks so will their robustness to withstand power supply over-voltage problems as they turn more fragile. Hence an increasingly important topic has become the protection of electronic components from DC Mains borne over-voltage surges and spikes that could cause irreparable damage to the equipment.

WITH THE CURRENT GLOBAL ELECTRONIC CHIP SHORTAGES, BEST TO PROTECT YOUR EXISTING EQUIPMENT TO AVOID
BEING CAUGHT IN A SITUATION OF DAMAGE WITH NO SHORT TERM REPLACEMENTS AVAILABLE FOR A GOOD WHILE !

When you wire-in this OVP Module between your equipment and its DC Power Source your Sensitive and Expensive Electronics will be Fully Protected against any momentary or continuous Over-Voltage or Current Overload conditions, with Fully Automatic Self-Restoring once the fault is corrected. And additionally it also effectively protects against a wide range of other DC Mains Induced Transient Voltage Surges, Spikes and Pulses

AFFORDABLE PROTECTION THAT CAN BE JUSTIFIED FOR ANY ELECTRONIC EQUIPMENT
PLUS: One OVP Module Alone Can Easily Protect Multiple Electronic Devices
as it can handle loads of 10Amp Continuous, and Up to 20Amp Max Peak Load


OVP Module Features Overview

- Fully Automatic 24/7 Over-Voltage Protection for any Sensitive Electronic Devices that Operate from a DC Voltage Supply.
-
Handles 10Amp Continuous Total Load, 20Amp Max Intermittent Load.
- Compatible with All DC 12V Nominal Voltage Power Systems. A 24V System version will also be available.
- Fast Precise Over-Voltage Protection Action with Fully Automatic Self-Restoring. No Operator Intervention Required.
- Also protects equipment against extreme Undervoltage Conditions.
- Over-Current Short-Circuit Protection with Fully Automatic Self-Restoring.
- Protects Sensitive Electronics from Induced Transient Surge Voltages (Nearby Lightning Strikes, Inductive Load Switching, etc.)
- No Internal Fuses to Replace or Breakers To Reset EVER. No Mechanical Switches or Relays.
- Super Easy Installation, Just Connect And Forget. Requires Very Little Space and Minimal Power to Operate.
- Active 100% Solid State Design. No Maintenance Required. No Parts To Replace.
- Maximum 150mV (0.15V) Total Input-To-Output Voltage Burden at Full 10Amp Load. Proportionally Less at Lower Currents.
- Prominent Bright LED Tri-Color Status Indicator: GREEN: Voltage OK; RED: Over-Voltage Cut-Off; ORANGE: Over-Current Trip.
- Ultra Low Power Standby Consumption. Always Stays Cool During Normal Operation.
- Immune to RFI (Radio Frequency Interference) from any nearby VHF Radios, SSB, Radar, AIS, Wifi, Sat-Phone, etc.


Common (And Expensive) Electronic Devices Easily Damaged by Over-Voltage

- Sensitive Marine Network Power and Components (NMEA2000, Raymarine SeaTalkNG, SimNET, B&G H1000/2000/3000, and others).
- Chartplotters designed only for 12V operation (certain models from Raymarine, Furuno, Garmin, Lowrance, Hummingbird, older equipment, etc.)
- Network Powered Devices (Autopilot Compass/Computer, GPS Antennas, Data Converters, Transducers and Interface, etc.
- Marine Navigational and Environmental Instruments, Autopilot Control Heads, Multifunction Instruments.
- Marine Security Monitoring Cameras, Thermal Surveillance Cameras.
- Marine Satellite-TV and Internet/Phone/Data Antennas.
- AIS Transponders, Marine VHF 2-Way Radios, SSB Transceivers, CB Radios.
- DC Powered Wifi Range Booster Antennas and Routers, TV Antenna Boosters.
- Marine/Car Stereo CD/Receiver Equipment and Amplifiers.
- USB Converter Plug Operated Electronics.
- Plus Any Other Electronic Equipment designed for 12V DC nominal operation.

Frequent DC Supply Fault Scenarios That Could Potentially Damage Your Sensitive Equipment

- Power Supply Regulator Failure.
- Alternator Voltage Regulator Failure.
- DC-DC Converter Short or Failure.
- Wind Generator/Solar Controller Short or Failure.
- Automatic Battery Charger Short or Failure.

- AC Voltage Power Surges.
- Accidental Power Wiring Errors During Installation.
- Nearby Lightning Strike Induced Voltage Surges and Spikes.
- Inductive Load Switching Induced Voltage Surges and Spikes.

OVP Module Technical Specifications and Features

- Nominal Operating Voltage Range: 10-15V. A 24V System Version will be available as well.
- Over-Voltage Trip Voltage: 15.3V (+/-1%). Instantly will disconnect supply voltage from device to Prevent Any Damage.
- Voltage Switch Off (Protection) Time: Less than 10mS at set voltage limit. Instantly Protects Sensitive Equipment and Prevents Damage.
- Over-voltage Reset: Fully Automatic Self-Restore. As soon as the over-voltage condition is removed, full power output is immediately restored.
- Status Indicator: Bright Tri-Color Green/Red/Orange LED Indicator shows status at a glance.
- Additional Input Voltage Protection: GDT (Gas Filled Plasma Discharge Arrestor Tube) 75V 2kA Spike and Surge Absorber/Protector.
- Additional Output Voltage Protection: Bi-directional TVS "TransZorb" 600W ESD Transient Voltage Suppressor.
- Maximum Recommended Continuous Load Current: Up to 10Amp, No Time Limit.
- Maximum Recommended Peak Load Current: 20Amp Peaks for up to 5 minutes.
- Short-Circuit Protection: A Current Peak of >25Amp will Trip the Automatic Overload Protection.
- Short-Circuit Protection Mode: Self-Restoring PPTC Fuse (Polymeric Positive Temperature Coefficient device).
- Short-Circuit Restore: Fully Automatic, 5-30 seconds after overload condition is removed (Time depends on severity of overload condition).
- Internal Protection Switching Device: Latest Generation 100% Solid State Device. No Mechanical Relay Contacts to Wear or Burn Out.
- Total Voltage Burden: Only 150mV (0.15V) at Full 10Amp Load. 65mV (0.065V) drop at 5Amp. 15mV (0.015V) drop at 1Amp.
- Own Power Consumption: Less than 25mA (0.025Amp) at 13.8V, while actively monitoring DC Input voltage in the background.
- Input/Output Connection Type: Robust Barrier Terminal Strip, Steel SEMS Screws with Integral Wire Catch Plate.
   Each Screw Contact Terminal is manufactured to handle up to 30Amp and 300V.
- Connection Acceptance: Up to TWO #12 Stranded or Solid Wires On EACH terminal, or takes multiple #8 Spade/Ring Crimp Terminals.
   Guaranteed to Securely Hold Bare Wire Sizes from #12 to #22.
- Operating Temperature: Continuous duty at full 10Amp load from 0-50° C ambient.
- Housing: High Impact Resistant ABS. IP-54 Ingress Protection Rated for Splash/Dust (Not suitable for wet locations).
- Dimensions: 3.25"W x 2.10"L x 1.20"D / 83 x 53.5 x 30.5mm (including side mounting flanges).
- Unit Weight: approx. 4.3oz (120gr).


Questions? Contact Us


This Website Content and All Images
Copyright © OVProtection.com

Latest Update: April 05, 2020